Platform Beds - Order Secure Online or Call Toll Free (888)717-7908 American Bed Assembly PlatformBeds.com     Total:   $0   Assembly Information: American Wood Platform Beds Platform Beds (Home) >> American Wood Beds >> Midwest Heirloom Bed Assembly The bed we are going to assemble is the Country Manor. These assembly steps are for a platform style bed which uses a 12 slat system. These assembly steps should cover the assembly steps for most platform beds made by Midwest Heirloom Furnishings. Follow the steps below to assemble your bed. Step 1: Lay out all of your parts. You should find a headboard, footboard, (2) rails, center support, (12) slats and a small package of wood screws. Begin assembly by selecting the headboard, footboard and side rails. Arrange these so that the rails will be in proper distance with the headboard and footboard for easier connection and assembly. Tools needed will be a Phillips screwdriver and rubber mallet.   Step 2: When connecting the headboard and footboard to the rails notice the steel brackets that are on both the siderail and on the headboard. These are pre-installed by the manufacturer and allow for easy connecting of the siderails to the headboard and footboard. The rails have round mounts that slip into holes on the brackets that connect the two. Often these can be hand installed easily but a rubber mallet tapping these down securely will ensure the best fit.   Step 3: Dropping the slats into the bed is made very easy as the manufacturer has pre-cut slots for each slat to fit into. There is a recommended placement of some slats as these have pre-drilled holes which allow them to be secured to the side rails with the provided wood screws. One placed towards the middle and the others placed towards the outside.   Step 4: Slat placement can be made easier by placing the center support piece beneath the slats. The center support has feet beneath it that will allow you to place it so that it will help provide center support. These are approxamtely 3/4 to 3/5 the length of the side rail and several slats above this piece have pre-drilled holes that will allow you to secure it to several slats.   Step 5: Your final step should be to check that all of the rails, headboard and footboard connections are tight and secure. Also check the slats and the wood screws that were used to secure several of them to the frame and just make sure these are tightened well to the rails and center support. Once you're satisifed everything is ready then go ahead and place your mattress onto the frame and start enjoying your new bed.   * Free Shipping of Platform Bed Models to any of the 48 Continental United States of America PlatformBeds.com 3735 Avenue of the Cities Moline, IL 61265 Email: more-info@platformbeds.com Toll Free Phone: 1-888-717-7908   ::  Home  :: Site Map  :: Resources Program :: Resource Links :: Platform Bed Reviews :: :: Platform Bed Designs :: Platform Bed Specs :: History of Beds :: Platform Bed :: :: About Our Store :: Extra Long Beds & Dorm Size Beds :: Bamboo Beds :: ©1998-2009 PlatformBeds.com ** All Rights Reserved **